BSS Audio FDS-334T Owner's Manual - Manual (Page 34)

3 4
Input Mode
There are three input sections: Input A, Input B and Input Sum (A+B). Delay and EQ can be
added to Inputs A, B and stereo linked A&B but only delay is available directly to the Sum A+B.
Input B Delay when in Mono mode
Input A+B Sum Delay
The input sum of A+B only has a Delay value to edit.
Stereo mode
Inputs A and B Stereo linked
When Inputs are Stereo linked in the Utilities section both Input A and Input B parameters are
ganged.
Inputs Delay
Input Delay
Delay is available from 0 - 635ms in 21 µs increments for Input A, Input B and Input A+B.
There cannot be more than 635.417 ms of delay on any input to output path.
Delay units to represent this value, as either milliseconds, metres, feet or frames per second, are
set in the Utilities section - press the UTILS button from any Delay screen to access this.
Inputs EQ
Input EQ
Inputs A, B (and A&B) can have EQ assigned to them. High and low shelving with 12dB or
6dB/octave slopes as well as full parametric bell curves are available. To add EQ to Input Sum
A+B, adjust EQ parameters on the individual unmixed inputs (A, B) which are then summed into
Input A+B.
See the section on Assignable EQ for more information.
Inputs Mode