Campomatic C64EWR - Manual (Page 12)

9
USING THE GRILL – TOP CAVITY
Figure 8
The top cavity control turns the grill on
and off (Figure 8). Turn the control knob
clockwise to select the grill temperature
Place the food in the middle of the grill
pan and position the pan so the food is
near but not touching the top element. Do
not line the grill pan with aluminium foil.
Use the handle when handling the grill
pan.
When the food is cooked, turn the oven
control and temperature control (°C) to
off (
•
).
Figure 11
GRILL
PAN
GRILL
POSITION POWER ON
INDICATOR
POWER ON
INDICATOR
Figure 9
25982-25 5 7.qxp 2 / 6/2 7 7:24 Page 9
AUTOMATIC MODE
In this mode you program the cooking start and end
time and length of cooking.
1. Before programming, ensure that real time has
been set. Set the temperature from oven control panel.
Place the dish you want to cook in the oven.
2. Set the cooking end time by holding
button and pressing “+” button. While pressing
button press “.” button at the same time to set length
of cooking from cooking table. The inscription of
“AUTO” and
sign are displayed.
3. The oven will stop itself automatically at the end time and an Alarm sound will
be heard. To stop the alarm, press either
, and .
4. Set the temperature button to position ( 0 ).
5. The inscription of “AUTO” will continue to flash. It means that the program has
not been deleted. To delete the program, press
button.
Changing Cooking Time After Programming
During functioning of your oven you can change the length of cooking and cooking
end time.
The cooking process stops and the clock/timer gives alarm.
To stop it press either
or .
Use of Alarm Mode for Various Purposes
● You can use the clock/timer of your oven for various purposes other than cooking
program.
● Hold pressing
button and press “+” at the same time to set the alarm time.
● The symbol is displayed.
● When the set time is reached the alarm sounds.
● To stop the alarm press either
or .
Pişirmenin bitiş zamann değiştirmek için:
Otomatik programlama yaptysanz;
1- STOP (durdurma) düğmesine basnz.
2- Rakam küçültmek için “ -” düğmesine büyütmek için “+”
düğmesine basnz
To change the length of cooking:
1. When button
is pressed, the length of cooking is
displayed. To set the new length of cooking press “+” or “-
“. To interrupt functioning of the oven(to stop) hold
pressing
button and press “-“ to reset.
To change cooking end time :
If you have selected automatic mode :
- Press STOP button.
- Press “-“ button to decrease number and press “+” button
to increase number.
COOKING WITHOUT PROGRAM
This method is used when no programming is necessary
and the cooking is to be started and ended by you.
First press reset. If any programmed or manual (non-
programmed) cooking has been done before the memory
has this program, AUTO flashes in the display indicator.
You should reset it in both cases. Otherwise, you will not
be able to perform manual (non-programmed) cooking.
1. If the memory has any program, reset your clock/timer.
2. After putting the food you desire to cook into the oven, turn the oven control
switch to the required position indicated in the cooking table.
3. The clock/timer does not interrupt electric circuit in non-programmed (manual)
cooking, you turn the switch to position “0” to end the cooking.
Clock/timer reset:
1. Press
button 2. Press “-“ button to reset. 3. Press button
SEMI-AUTOMATIC PROGRAMMING
In this mode you start the cooking process and the oven
will automatically switch itself off again when the set time is
reached. In this mode you must set the length of cooking.
1. From the oven control panel set the cooking temperature from the cooking table.
Prepare the dish you want to cook and place it in the oven.
2. Hold pressing the
button and press “+” to set the length of cooking from
the cooking table. The AUTO and are displayed in the display steadily. The
time is counted down. Press button to see the remaining time when cooking
process is on. Normal time is displayed 5 seconds after pressing the button.
3. At the end of set cooking time the oven stops automatically and an alarm is
heard. At that time AUTO flashes and
sign is deleted. To stop the alarm
press either , ,
4. Turn the oven temperature button to position ( 0 ).
5. The inscription “AUTO” will continue to flash. It means that the program is not
deleted. To delete the program, press
button
AUTOMATIC MODE
In this mode you program the cooking start and end
time and length of cooking.
1. Before programming, ensure that real time has
been set. Set the temperature from oven control panel.
Place the dish you want to cook in the oven.
2. Set the cooking end time by holding
button and pressing “+” button. While pressing
button press “.” button at the same time to set length
of cooking from cooking table. The inscription of
“AUTO” and
sign are displayed.
3. The oven will stop itself automatically at the end time and an Alarm sound will
be heard. To stop the alarm, press either
, and .
4. Set the temperature button to position ( 0 ).
5. The inscription of “AUTO” will continue to flash. It means that the program has
not been deleted. To delete the program, press
button.
Changing Cooking Time After Programming
During functioning of your oven you can change the length of cooking and cooking
end time.
The cooking process stops and the clock/timer gives alarm.
To stop it press either
or .
Use of Alarm Mode for Various Purposes
● You can use the clock/timer of your oven for various purposes other than cooking
program.
● Hold pressing
button and press “+” at the same time to set the alarm time.
● The symbol is displayed.
● When the set time is reached the alarm sounds.
● To stop the alarm press either
or .
Pişirmenin bitiş zamann değiştirmek için:
Otomatik programlama yaptysanz;
1- STOP (durdurma) düğmesine basnz.
2- Rakam küçültmek için “ -” düğmesine büyütmek için “+”
düğmesine basnz
To change the length of cooking:
1. When button
is pressed, the length of cooking is
displayed. To set the new length of cooking press “+” or “-
“. To interrupt functioning of the oven(to stop) hold
pressing
button and press “-“ to reset.
To change cooking end time :
If you have selected automatic mode :
- Press STOP button.
- Press “-“ button to decrease number and press “+” button
to increase number.
SETTING THE DAY REAL TIME - MANUAL MODE
COOKING WITHOUT PROGRAM
This method is used when no programming is necessary
and the cooking is to be started and ended by you.
First press reset. If any programmed or manual (non-
programmed) cooking has been done before the memory
has this program, AUTO flashes in the display indicator.
You should reset it in both cases. Otherwise, you will not
be able to perform manual (non-programmed) cooking.
1. If the memory has any program, reset your clock/timer.
2. After putting the food you desire to cook into the oven, turn the oven control
switch to the required position indicated in the cooking table.
3. The clock/timer does not interrupt electric circuit in non-programmed (manual)
cooking, you turn the switch to position “0” to end the cooking.
Clock/timer reset:
1. Press
button 2. Press “-“ button to reset. 3. Press button
SEMI-AUTOMATIC PROGRAMMING
In this mode you start the cooking process and the oven
will automatically switch itself off again when the set time is
reached. In this mode you must set the length of cooking.
1. From the oven control panel set the cooking temperature from the cooking table.
Prepare the dish you want to cook and place it in the oven.
2. Hold pressing the
button and press “+” to set the length of cooking from
the cooking table. The AUTO and are displayed in the display steadily. The
time is counted down. Press button to see the remaining time when cooking
process is on. Normal time is displayed 5 seconds after pressing the button.
3. At the end of set cooking time the oven stops automatically and an alarm is
heard. At that time AUTO flashes and
sign is deleted. To stop the alarm
press either , ,
4. Turn the oven temperature button to position ( 0 ).
5. The inscription “AUTO” will continue to flash. It means that the program is not
deleted. To delete the program, press
button
ğmesine basnz
To change the length of cooking:
1. When button
is pressed, the length of cooking is
displayed. To set the new length of cooking press “+” or “-
“. To interrupt functioning of the oven(to stop) hold
pressing
button and press “-“ to reset.
To change cooking end time :
If you have selected automatic mode :
- Press STOP button.
- Press “-“ button to decrease number and press “+” button
to increase number.
12
12
This appliance/fitting is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, the Crossed Out Wheelie Bin symbol, indicates that this appliance/fitting may not
be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery
and recycling of this product, please contact your local authority, your household waste disposal service or the retailer where you purchased the product.
This appliance/fitting is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, the Crossed Out Wheelie Bin symbol, indicates that this appliance/fitting may not
be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery
and recycling of this product, please contact your local authority, your household waste disposal service or the retailer where you purchased the product.