Cetacea Sound PAS I Presentation Audio System Quick Start Guide - Manual (Page 2)

PAS I PRESENTAION AUDIO SYSTEM
READ THESE INSTRUCTIONS CLOSELY
IMPORTANT SET-UP INSTRUCTIONS
Speakers with Subwoofer
1) Now that the speakers are working properly, (see other side), turn off the
music and disconnect the power adapter from the base of the volume
control knob. This power adapter is not used with the PAS-I subwoofer.
2) Plug the subwoofer power cord into a 110v power source.
3) Take the subwoofer interconnect cord out of its package and attach both
wires to both the front of the subwoofer and the base of the volume control
knob. (The wires only fit one way.)
4) Be sure to disconnect the speaker power adapter first.
5) The interconnect cord cannot be connected incorrectly to either the speaker
volume control knob or the front of the subwoofer. Just plug in the two
connectors securely where they fit.
6) Adjust volume control on front of subwoofer to the 12 o’clock position.
7) Turn on the music again and adjust subwoofer volume to a pleasant
listening level.
8) Satisfy yourself that the system is working properly.
9) Re-read your owner manual and the complete set-up instructions that
come with it to obtain maximum use and enjoyment from this exciting
new audio system.
IMPORTANT
If you have difficulties, re-read your owner manual thoroughly and/or call
Technical Support at 800-556-1922. Please have your purchase receipt handy.
12/09 200904-019
If you have questions, call Technical Support at 800-556-1922.
www.cetaceasound.com