ChamSys MagicQ Software Change Log - Manual (Page 101)

MagicQ Software Change Log 87 / 121
58.2 Bug Fixes
Fixed problem with inserting a Mark Cue after Cues set to Timecode - the Mark Cue would be incorrectly set to timecode value
0 causing the Cue Stack to work incorrectly.
Corrected protocol issues in CITP/MSEX which stopped some media servers such as Madrix being able to send thumbnails.
#0003966
Output Window title bar now shows when it is in Input mode. #000647
Remote control from a system with a higher screen resolution than the console would cause screen painting issues on the remote
system. #0004242.
It was not possible to move or copy Cue Stacks from the Stack Store to a playback with a default cue. #0004597
When a FX is used in a cue, and the same FX is used with the same parameters ←
except for size in the next cue, the parameters changes in that last cue were ←
not applied. #0004527
There was a naming error in the Head Editor, Multi Element, Order options. The first "Bottom right to Top Snake" was actually
"Bottom right to left snake". #0004621
If you updated the current Cue in a Cue Stack with Move When Dark enabled then the current Cue would be re-output without
the move when dark. #0004560
Removing an attribute from a head in the Head Editor could result in the removal of more than one attribute if multiple columns
were cursor selected. #0000274
There was a possible reset when removing Cues from the end of a Cue Stack when the Cue Stack was active with the current Cue
as the last or previous to last Cue. #0003658
Fixed problem with remote controlling a MagicQ from another MagicQ system. When using the UPDATE function the remote
system would not show the state of the update options correctly.
Fixed problem with using the UPDATE function - once Patch Offset was selected then it was not possible to clear this option.