ChamSys MagicQ Software Change Log - Manual (Page 118)

MagicQ Software Change Log 104 / 121
Chapter 70
Version 1.5.1.5
70.1 New Functions
70.1.1 Keypad Copying / Moving Cues
It is now possible to copy and move Cues within a Cue Stack directly from the keypad using Cue Id numbers rather than the
cursor keys and enter.
The Cue Stack Window must be open (press the S button of the Playback two times to open it).
COPY <from Cue ID> @ <to Cue ID>
MOVE <from Cue ID> @ <to Cue ID>
For example to copy Cue ID 1.00 to Cue ID 3.1 type
COPY 1 @ 3.1
If the <to Cue ID> is not specified or is greater than the last Cue ID in the Cue Stack then the Cue is copied to the end of the Cue
Stack.
To copy Cue ID 1.00 to the end of the Cue Stack type
COPY 1 @
If the <to Cue ID> matches a Cue ID already in the Cue Stack then the Cue will be inserted before that Cue ID.
Multiple Cues can be copied/moved using THRU, e.g.
COPY 1 THRU 2 @ 3
70.1.2 Cue Window
The Cue Window, View Times, Simple View now always shows the list of possible attributes even when no heads are selected.
There are new shortcuts for quickly opening the Cue Window - hold the S button of the playback and press the Pos, Beam, Col,
Int or FX buttons. The Cue Window will be opened with the cursor on the appropriate field.
70.1.3 Other changes
Improved graphics in Normal Mode.
Modified start splash screen just to have only the Continue Show button. The Help and New Show options have been removed.
New shows can be started from Setup, View Settings, New Show. Help can be accessed by pressing the HELP button.
The maximum grid width has now been increased to 1024 pixels.