CHIAYO UDR-1000 - Manual (Page 8)

The functions of USB port
Every receiver and transmitter has a mini USB ( Universal Serial Bus ) port. This
USB port has two functions:
1.Function as a charging port.
When a designated cable with both ends equipped with mini USB jacks is
connected between the receiver and the transmitters UH-2000 or UM-2000, the
receiver will provide the current to charge the transmitter batteries. Make sure the
receiver is on and the batteries used are rechargeable type. The LCD panel of the
receiver has a designated charging icon, which will be flashing during the charging
process. On the transmitter, the battery icon will display the battery status.
2.Downloading information
When the receiver and transmitter are connected via a cable at the USB port.
Pressing the SCAN button will activate the DOWNLOAD function. Information
such as Frequency, User Name, User / Preset Mode and Edit information will be
downloaded from the receiver to the transmitter.
SCAN function
The SCAN button has two functions :
1. Auto scan
When SCAN button is pressed, receiver will start the auto scanning function. It will
compare 200 of the preset frequencies with the environment and select 40 of them
and save it in Group 1 of the 25 groups. The whole SCAN process will take about 3
minutes to complete. These frequencies are interference free frequencies but they
do not mean they are inter-modulation free amongst themselves. That means they
do not mean they are interference free amongst themselves.
During the SCAN process, press the SCAN button again to stop the function and
return to the original setting.
2. Downloadinginformation
When the receiver and transmitter are connected by a cable via the USB ports.
Pressing the SCAN button will activate the DOWNLOAD function. Frequency, User
Name, User / Preset Mode and Edit information will be downloaded from the
receiver to the transmitter.
UH-2000 microphone requires 2 pieces of " AA " size batteries
to operate. Please insert the batteries according to the correct
polarity as indicated.
Handheld Transmitter : UH-2000(UHF)
Many batteries are known to have leakage problem of conductive and corrosive liquid.
Please observe the rule to remove the batteries if they are not to be used for a longer
period.
Due to various unstandardized sizes ( diameters ) of " AA " batteries, this battery
compartment is designed to accommodate the most commom Alkaline batteries only.
First unscrew the metal grill from the housing and take out the capsule to be replaced. Then
insert a new capsule. Either dynamic or condenser type can be chosen from location to
location.
. Microphone capsule module
.
.
.
.
LCD
Battery compartment
Rotating protective cap for controls
(also serves as color identification cap)
Power control
1
2
3
4
5
. Set
. Up
. Down
. Charging port
. Name plate 6
7
8
9
10
Parts and functions
Changing of capsule
Battery installation
Caution
7 8