Cloud Electronics PM1 - Manual (Page 5)

PM1 Installation and User Guide v1.0 5
Overview
Thank you for purchasing this Cloud PM1 paging microphone.
The PM1 is a single-zone, passive paging microphone; that is, one for use in situations
where announcements are always made to the same area (or areas) of a building*. It
consists of a heavy-duty moulded base fitted with a dynamic mic capsule on a
300 mm gooseneck. The base incorporates a PTT (Press To Talk) button which
unmutes the mic and provides switch contacts for the host device’s access connector.
The PM1 is directly compatible with the following current Cloud products:
Z4ii and Z8ii Venue Mixers
•
CX163, CX261 and CX263 Mixers
•
36/50 and 46/50 Integrated Mixer Amplifiers
•
MPA-626
•
MPA 60/120/240
•
DCM-1 Digitally-Controlled Mixer (via its analogue connection)
•
Other, older Cloud products may also be compatible; please contact Cloud’s Technical
Department for advice.
The PM1 may also be used with any OEM audio system equipped with ‘short-to-
ground’ paging access for selecting the zone(s) to be paged.
*Other models in the PM range are available which permit announcements to be made to specific areas
of a building – these are termed “multi-zone” paging microphones. Please contact your Cloud dealer/
distributor for more information