Code CR2 User Manual
Page 55
C001537_18_CR2_User_Manual
49
Save Settings
4.5 - Reader ID and Firmware Version
4.6 - Reader Settings Lock
To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked
Reader Settings Unlocked
NOTE: Prefix and Suffix programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and
“Suffix -Erase/None”commands are not locked by this feature.
To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read
the following code:
Reader ID and Firmware
You will see a text string indicating your firmware version and CR2 ID number (see below):
Xap/i - Code Internal ID (not applicable)
VVVV is the application firmware version number
WWWW is the bootloader firmware version number
XXXX is the radio firmware version number
SSSSSSSSSS Reader’s serial number (ten digits)
P is “A” if running firmware is the application, “B” if BootLoader
XXX-XX+XX - Internal ID (not applicable)
Example:
Xap/i3000300006040010002363A06D-SD+SQ
Note: Code will periodically release new firmware for CR2 readers. For information on latest firmware versions, call Code
at (801) 495-2200. To upgrade firmware, please visit our website at
http://www.codecorp.com/codesupport/html and
follow instructions provided.
Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX