Comtech EF Data CDM-700 - Manual (Page 162)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–12
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Interface Rx
Data Rate IRR= 1 bytes Command or Query.
Interface Rx Data rate, in Mbps:
s=Defines which interface slot (1 or 2)
c=Defines which channel (1 to 2)
xxx.xxxxxx=Defines the transmit data rate in Mbps.
Resolution=1 bps.
*Note: Interface types G.703 and GbEI cannot vary in
datarate.
Example: IRR=11002.047999 (which is 2.047999 Mbps) on slot
1 channel 1. IRR=
IRR?
IRR*
IRR# IRR?sc IRR= xxx.xxxxxx
(see description of
arguments)
Rx Frequency RFQ= 9 bytes Command or Query.
Rx Frequency:
- IF: 52-88 MHz and 104-176 MHz.
- L-Band: 950-1950 MHz.
Resolution=100 Hz
Example: RFQ=0140.9872 RFQ=
RFQ?
RFQ*
RFQ# RFQ? RFQ=xxxx.xxxx
(see description of
arguments)