2 config mdm: intf1 – oc3 (optical) page – Comtech EF Data CDM-700 User Manual
Page 218

CDM-700 High Speed Satellite Modem
Revision 5
Web Server Pages
MN/CDM700.IOM
15.5.3.2
Config Mdm: INTF1 – OC3 (Optical) Page
Figure 15-10. Config Mdm: INTF1 – OC3 Page
Typically, the configuration interface window on the ‘Config Mdm: INTF1’ page identifies, in
the upper lefthand corner, the interface module type installed into Slot 1.
As shown in Figure 15-10, the CDI-50 OC3 / STM-1 Interface Module is installed in the Slot 1
position in the CDM-700 chassis.
For details on the configuration parameters available for this interface, refer to Chapter 6.
FRONT PANEL OPERATION and Appendix C. OC3 / STM-1 Interface (CDI-50).
Once the desired configuration settings have been made on this page, the User should then click
on Submit to save these changes.
15–12