Comtech EF Data CDM-625 DC-AC Conversion with IP Packet Processor - Manual (Page 2)

CDM-625 DC-AC Conversion Instructions with IP Packet Processor
MN-625DCACIPFRI Rev A Page 2 of 4
Copyright © Comtech EF Data Corporation, 2012. All rights reserved.
2. Remove all the connections to the DC line assembly. This includes the three (3) red wires, two
(2) blue wires and one (1) black wire.
3. Remove the two (2) mounting screws and ground lug nuts. Remove the DC input and install the
AC input (PF-0000001). Install two (2) fuses (FS-0000032) into the fuse housing.
Remove 3 red, 2 blue and 1 black wires
Two (2) mounting screws and ground lug
PF-0000001 FS-0000032 (2X)