Comtech EF Data CRS-150 - Manual (Page 65)

A-1
Appendix A. CABLE DRAWINGS
A.1 Introduction
This appendix contains drawings of cables used with the CRS-150 1:1 Redundancy Switch. These cables are broken into two categories:
Control Interface Cables and IF / Utility / Data Interface Cables. Each section provides illustrations of the cables’ technical specifications;
additionally, the table in each section cross-reference to the illustrations found in
Chapter 4. CABLES AND CONNECTIONS .
A.2 Control Interface Cables
App. A
FIG
REF Ch. 4
FIG
CEFD CABLE P/N DESCRIPTION
Modem Æ Switch
USED FOR (TYPE)
A-1 4-1 CA/USB-AM/BM-3 USB Type ‘B’ Male Æ USB Type ‘A’ Male, 3’ 1:1 Auxiliary Serial Control
A-2 4-14 CA/WR10456-4
Control/Data Cable, Y-Splitter
DB-25M Æ DB-25M (4’), DB-9M (1’)
1:1 Data/Control
CDM-600L (CDM-9600L) ÆCRS-150 Æ CRS-170A