Comtech EF Data CRS-180 - Manual (Page 62)

CRS-180 70/140 MHz IF 1:1 Redundancy Switch MN/CRS180.IOM
Cables and Connections Revision 11
5–2
5) The modem-specific sections in this chapter identify the required redundancy
kit. Specific interface cabling examples are further identified:
• Sect. 5.2 Cabling to the CDM-625 or CDM-625A
• Sect. 5.3 Cabling to the CDM-760 or CDM-750
• Sect. 5.4 Cabling to the CDM-570 or CDM-570A
• Sect. 5.5 Cabling to the CDM-710G
• Sect. 5.6 Cabling to the CDM-710
• Sect. 5.7 Cabling to the CDM-700
Separately sold interface kits and cable assemblies are available to facilitate
connection from the modems to a variety of user terrestrial data interfaces.
Examples of these cabling configurations are further identified throughout this
chapter.