Comtech EF Data CRS-400 - Manual (Page 74)

CRS-400 1:8 Redundancy Switch Revision 0
Remote Control MN/CRS400.IOM
58
A.7.3 (UTILITY) DISPLAY (D ISPLAY B RIGHTNESS )
EDIT DISPLAY BRIGHTNESS:
100% (PRESS ENTER)
To edit the display brightness, use the UP/DOWN arrow keys. Press ENTER when the
brightness is suitable.
A.7.4 (UTILITY) POLLING
POLLING: SUSPEND RESUME
WILL RESUME IN 91 SEC
The switch is continually polling units via the EIA-485 bus. To temporarily suspend
polling (example: for viewing a redundant unit configuration via the front panel), use the
RIGHT/LEFT arrow keys to select SUSPEND, and press ENTER. The second line of the
display shows the number of seconds remaining (counting down from 99) before polling
will automatically resume.
To resume polling immediately, use the RIGHT/LEFT arrow keys to select RESUME,
and press ENTER.