Comtech EF Data CDM-IP 300L - Manual (Page 185)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
159
Maximum bandwidth in kbps <0 -
99999, enter = 99999 0 -
99999
Enter desired Maximum Bandwidth in kbps.
If no Maximum is desired, select enter, Bandwidth will be
displayed as ‘99999’
Source IP address <enter = 0.0.0.0>: x.x.x.x Enter desired Source IP Address or subnet.
If no Source IP is desired, select enter, Source IP will be
displayed as ‘***’
Number of source subnet bits <0,8-
32, enter = 0>:
0,8-32 Enter desired Source subnet bits.
If no Source subnet is desired, select enter, Source subnet
will be displayed as ‘/*’
Destination IP address <enter =
0.0.0.0>: x.x.x.x Enter desired Destination IP Address or subnet.
If no Destination IP is desired, select enter, Destination IP
will be displayed as ‘***’
Number of Destination subnet bits
<0,8-32, enter = 0>: 0,8-32 Enter desired Destination subnet bits.
If no Destination subnet is desired, select enter, Destination
subnet will be displayed as ‘/*’
Specify TCP/UDP source port [MIN]
(1 - 65535)<Enter: ***> 1 -
65535
Enter desired TCP/UDP source port (or Min port of a range).
If no TCP/UDP source port is desired, select enter, Source
port will be displayed as ‘***’
Specify TCP/UDP source port [MAX]
(1 - 65535)<Enter: ***> 1 -
65535
Enter desired TCP/UDP source port (or Max port of a
range).
Will not display if no MIN TCP/UDP source port was
selected.
Specify TCP/UDP destination port
[MIN] (1 - 65535)<Enter: ***> 1 -
65535
Enter desired TCP/UDP destination port (or Min port of a
range).
If no TCP/UDP destination port is desired, select enter,
Destination port will be displayed as ‘***’.
Specify TCP/UDP destination port [MAX]
(1 - 65535)<Enter: ***> 1 -
65535
Enter desired TCP/UDP destination port (or Max port of a range).
Will not display if no MIN TCP/UDP destination port was selected.
Set WRED (Weighted Random Early
Discard) <Y or N><Enter : Y> Y or N Select to enable Weighted Random Early Detect.
Specify Filtering for the rule <Y or
N><Enter : N> Y or N Select to prevent traffic defined in rule to be forwarded.
Default N = not filtered
Delete D Enter the QoS Rule to delete <1..32>
Base [1] B Select Base to view, edit, or display a different set of 8 QoS Rules.
For example, if 8 QoS Rules have been defined, add a new rule by
selecting B 9. The QoS Configuration page will refresh and now
display QoS Rules 9 – 16.
QoS [ ] Read
Only
Displays state of QoS option – Unavailable, Enabled Disabled. If
available, QoS is Enabled or Disabled from the Administrator
Features Page.
Save Parameters S This option allows a user to save the current configuration of the
CDM-IP to permanent storage. This configuration will be restored
on each successive power cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and return to its
parent menu.