ConnectGear WA660N - Manual (Page 72)

65
2-10-3 DHCP Server
This wireless access point is capable to act as a DHCP server for your
network, and it’s disabled by default. If you want to activate this function,
please click ‘System Utility’ on the left, and the following message will
be displayed:
Here are descriptions of every setup item:
Default Gateway
IP
Please input the IP address of default gateway of
your network here.
Domain Name
Server IP Please input the IP address of domain name server
(DNS) here.
Start IP Please input the start IP address of the IP range.
End IP Please input the end IP address of the IP range.
Domain Name If you wish, you can also optionally input the
domain name for your network. This is optional.
Lease Time Please choose a lease time (the duration that every
computer can keep a specific IP address) of every
IP address assigned by this access point from
dropdown menu.
NOTE: Please remember to select ‘Enable’ in ‘DHCP Server’
option as described in last Section or all DHCP-related fields will
be grayed out, and you will not be able to input any DHCP
parameter.