ConnectGear WA660N - Manual (Page 74)

67
Chapter III: Advanced Configuration
3-1 Configuration Backup and Restore
You can backup all configurations of this access point to a file, so you can
make several copied of access point configuration for security reason.
To backup or restore access point configuration, please follow the
following instructions:
Please click ‘Configuration Tool’ on the left of web management interface,
and the following message will be displayed on your web browser:
Here are descriptions of every buttons:
Backup Settings
Press ‘Save...’ button, and you’ll be prompted to
download the configuration as a file, default
filename is ‘config.bin’, you can save it as another
filename for different versions, and keep it in a safe
place.
Restore Settings Press ‘Browse…’ to pick a previously-saved
configuration file from your computer, and then
click ‘Upload’ to transfer the configuration file to
access point. After the configuration is uploaded,
the access point’s configuration will be replaced by
the file you just uploaded.
Restore to Factory
Default Click this button to remove all settings you made,
and restore the configuration of this access point
back to factory default settings.