Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 53)

TD040300-0MF
53
7.2.2 Analog Input
7.2.3 Analog Output
7.2.4 Analog Value
Property Identifier Property Datatype Code Remarks
Object_Identifier BACnetObjectIdentifier R
Object_Name CharacterString R
Object_Type BACnetObjectType R
Present_Value REAL W
Status_Flags BACnetStatusFlags R Status flags will display the status of the channel fault = false
for normal conditions. Overridden = false if the channel is not
forced.
Event_State BACnetEventState R Always normal. Check status flags for real condition.
Out_Of_Service BOOLEAN R/W
Units BACnetEngineeringUnits R
Priority Array BACnetPriorityArray R
Relinquish_Default REAL R
COV_Increment REAL R
* After the channel is configured as a Pulse Input, its object type will be Analog Value.
Property Identifier Property Datatype Code Remarks
Object_Identifier BACnetObjectIdentifier R
Object_Name CharacterString R
Object_Type BACnetObjectType R
Present_Value REAL R
Status_Flags BACnetStatusFlags R Status flags will display the status of the channel fault =
false for normal conditions. Overridden = false if the
channel is not forced. If the channel is a thermistor input
and the thermistor is disconnected, the fault flag will be true.
Event_State BACnetEventState R Always normal. Check status flags for real condition.
Out_Of_Service BOOLEAN R/W
Units BACnetEngineeringUnits R
Property Identifier Property Datatype Code Remarks
Object_Identifier BACnetObjectIdentifier R
Object_Name CharacterString R
Object_Type BACnetObjectType R
Present_Value REAL W
Status_Flags BACnetStatusFlags R Status flags will display the status of the channel fault =
false for normal conditions. Overridden = false if the
channel is not forced.
Event_State BACnetEventState R Always normal. Check status flags for real condition.
Out_Of_Service BOOLEAN R/W
Units BACnetEngineeringUnits R
Priority Array BACnetPriorityArray R
Relinquish_Default REAL R
*