Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 42)

TD020851-0MG
42
4.4.9.2 Configure Spanning Tree Protocol
The second panel of Figure 35 (Configure STP) allows you to either Disable (the
default) or Enable the protocol.
The third panel (Bridge Settings) is explained in Section 4.4.9.2.1.
The fourth panel (STP Port Settings) is explained in Section 4.4.9.2.2.
The fifth panel (STP Port Settings) is explained in Section 4.4.9.2.3.
Figure 35 — Configure Spanning Tree Protocol for 8-port Models