Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 70)

TD020851-0MG
70
oid = “1.3.6.1.2.1.17.2.15.1.4.port”
dot1dStpPortEnable: Port status
1 = enabled
2 = disabled
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.5.port”
dot1dStpPortPathCost: Contribution of this port to the path cost of any paths toward
the root bridge that include this port
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.6.port”
dot1dStpPortDesignatedRoot: Unique Bridge Identifier of the Root Bridge recorded in
the Configuration BPDUs transmitted by the Designated Bridge for the segment to which
the port is attached
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.7.port”
dot1dStpPortDesignatedCost: Path cost of the Designated Port of the segment
connected to this port
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.8.port”
dot1dStpPortDesignatedBridge: Bridge Identifier of the Designated Bridge for this
port's segment
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.9.port”
dot1dStpPortDesignatedPort: Port Identifier of the port on the Designated Bridge for
this port's segment
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.10.port”
dot1dStpPortForwardTransitions: Number of times this port has transitioned from the
Learning state to the Forwarding state
Access: read-only