Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 69)

TD020851-0MG
69
oid = “1.3.6.1.2.1.17.2.10.0”
dot1dStpHoldTime: Interval (hundredths of a second) during which no more than two
Configuration bridge PDUs shall be transmitted by this node
Access: read-write
oid = “1.3.6.1.2.1.17.2.11.0”
dot1dStpForwardDelay: Duration (in hundredths of a second) of a port’s Listening and
Learning states preceding the Forwarding state. This value is also used to age all
Forwarding Database dynamic entries when a topology change has been detected and
is underway.
Access: read-write
oid = “1.3.6.1.2.1.17.2.12.0”
dot1dStpBridgeMaxAge: MaxAge for all bridges when this bridge is the root
Access: read-write
oid = “1.3.6.1.2.1.17.2.13.0”
dot1dStpBridgeHelloTime: HelloTime for all bridges when this bridge is the root
Access: read-write
oid = “1.3.6.1.2.1.17.2.14.0”
dot1dStpBridgeForwardDelay: ForwardDelay for all bridges if this bridge is the root
Access: read-write
5.2.2.1.2.1 ‘dot1dStpPortTable’ 1.3.6.1.2.1.17.2.15
oid = “1.3.6.1.2.1.17.2.15.1.1.port”
dot1dStpPort: Port number of the port for which this entry contains STP management
information
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.2.port”
dot1dStpPortPriority: Value of the priority field contained in the first octet (in network
byte order) of the 2 octet Port ID
Access: read-only
oid = “1.3.6.1.2.1.17.2.15.1.3.port”
dot1dStpPortState: Port's current STP state
1 = disabled
2 = blocking
3 = listening
4 = learning
5 = forwarding
6 = broken
Access: read-only