Crest Electronics CRE57074 RCC REMOTE SWITCH DEVICE 2.4 GHZ - Manual (Page 8)

MU MODE: OFF Press the right arrow to turn the MU mode ON
Scroll down and press the right or left arrow to enter the Remote Switch Device desired
from MU1 –MU6.
Press the Menu button twice to return to the main screen. See Fig 7
Remote Switch Device MU
Operate the MUed Remote Switch Devices
On the main LCD screen the highlighted area [M –SU:] must be on to operate all of the
Remote Switch Device.
Press the right or left arrow and all of the switch machines will activate
When the direction button is pressed and the switch machine is in motion a switch busy
signal will show up where ‘link ok’ is. The switch busy signal will go away after the
entire switch machine reaches time settings. It’s recommend to wait until the switch
busy signal completes and then press the other direction necessary.
Press the up or down arrow to activate the switch machines on desired terminals [SW –
1 through SW –5].
Example: Press the up arrow to “SW –1”, and press the right or left arrow. All of the
Remote Switch Devices that have a switch machine to terminal [SW –1] will activate.
The rest of the switch machines will not activate. See Fig 8
Page 8