Cybex 525AT Arc Trainer User Manual
Page 32
Advertising
32
33
Cybex Service Manual
Install linkage arm
1. Place a drop of loctite on the SHCS and another drop in shaft where the SHCS will be
tightened into.
5
1
7
6
2
4
3
Description
1
Loctite
2
Cap
3
Arm handle
4
Linkage arm
5
Spacer
6
Flat washer
7
SHCS
2. Install linkage arm, spacer, cap, flat washer, and SHCS to arm handle.
3. Tighen SHCS securely. SHCS must be tightened to a minimum of 90 lbs-in.
Install heart rate cable
Plug heart rate cable into connector in frame.
2
1
Description
1
Socket in frame
2
Heart rate cable
Complete installation
1. Operate the unit at all levels to verify proper operation.
2. Hold the hand grips on the console handrail until a heart rate is displayed, typically less than
thirty seconds.
Advertising