Cybex 525AT Arc Trainer - Manual (Page 41)

41
Cybex Service Manual
Incline Motor
Tools Required
•
Side cutter
• Phillips screwdrivers (Long
Shaft)
•
Flat head screwdriver
• 1/2” ID External retaining-ring
tool
•
3/16” Allen wrench
• Torque wrench
• Cloth
Disconnect power
WARNING: Shock and electrocution hazard
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance
• Electrical charge can remain in unit after unplugging
• Keep water and liquids away from electrical parts
Unplug the power cord from power outlet.
Remove incline motor cover
1. Remove both screws securing the incline motor cover using a Phillips screwdriver.
1
2
Description
1 Incline motor cover
2 Screw (2)
2. Remove incline motor cover.
Remove lower incline motor support pin and retaining ring
1. Remove retaining ring from grooved pin using a flat head screwdriver.
1
2
3
Description
1 Incline motor
2 Retaining ring
3 Grooved pin
2. Remove grooved pin securing incline motor to main frame.