Daktronics Fuelight FL-2109 Series Petroleum Price Displays - Manual (Page 17)

Control Options 11
Section 5: Control Options
The FLR-100, FLR-500, FLR-1500, and FLD-2000 (indoor or outdoor) control kits can be used to
change petroleum prices displayed on the LED Fuelight ™ Petroleum Price displays. The instructions
provided in this section discuss the functions the operator uses to control the Petroleum Price display
with each control type.
5.1 FLR-100 Control Kit
The FLR-100 control kit can control four unique prices on multiple faces using an RC-50
transmitter and has a maximum range of 100 feet. The instructions provided in this section
discuss the functions the operator uses to control the displays.
Editing the Display
To edit the price on the display, press and hold any button for five seconds. When the display
is in Edit mode, the decimal LEDs blink.
On the transmitter, each pair of buttons corresponds to a price line on the display. Each line
is numbered to indicate the line it corresponds to.
Increasing the Price
To increase the price, press [+] for the
corresponding line.
Note: Make sure the display is in Edit
mode.
Decreasing the Price
To decrease the price, press [-] for the
corresponding line.
Note: Make sure the display is in Edit
mode.
Rapid Increase/Decrease
To rapidly increase or decrease a price,
press and hold the button for the
corresponding line.
Note: If no button is pressed for more
than 10 seconds, the display exits the
Edit mode. The prices are saved, and
the display returns to its normal state.
Figure 9: Transmitter