Daktronics Remote Control System RC-100 - Manual (Page 32)

26 DataMaster Applications
Display Option 1-5 (Lottery Displays Only)
Select a DISPLAY OPTION to set the position of the decimal for each lottery display line.
Display Action
L = current line
Press <ENTER> to set the display option or press
<CLEAR> to exit the menu.
L = current line
The current configuration is shown on the bottom line of
the LCD. Press the down arrow key <

> to select one of
the following values:
$000 (default)
$00.0
$0.00
Note: If the wrong configuration is selected for the display
being used, the value may not be displayed correctly.
Press <ENTER> when finished.
A screen will appear asking to confirm the selection.
Press <ENTER> again to update the display option.
Display Status
Select DISPLAY STATUS to view information about the display.
Display Action
Press <ENTER> to get the display status or press
<CLEAR> to exit the menu.
Press <ENTER> again and the LCD will show the
following display status items:

Driver Firmware Version

Current Day/Time

Last Reset Time

Current Temp

Temp Sensor Offset

Dimming Level

Dimming Mode

Temp Sensor Status

Light Sensor Status

COM1 Device

Timing Reference
Press <CLEAR> to return to normal operation, or press
<ENTER> to access two additional display settings:
Display Passcode and Detect Clients.
DI SPLAY OPTI ON L
ENTER TO EDI T
DI SPLAY OPTI ON L
$ OOO }
DI SPLAY $ OOO
ENTER TO UPDATE
DI SPLAY STATUS
ENT TO SELECT
DI SPLAY STATUS
GET STATUS?