Daktronics Remote Control System RC-100 - Manual (Page 34)

28 DataMaster Applications
Display Action
N= number of clients
The LCD will show how many clients are found. If the
<YES> key is pressed, this is the number that the
console will use for showing error messages if all
expected clients did not respond.
If the <NO> key is pressed, the LCD will toggle between
the two screens shown at left. The detect client function
can be retried by pressing <ENTER> or canceled by
pressing <CLEAR>.
Set Time 12HR
Select SET TIME 12HR to set the time as well as the date.
Display Action
Press <ENTER> to set the time of day or press
<CLEAR> to exit the menu.
Use the number pad to edit the time.
Press the down arrow key <

> to set AM or PM.
Press <ENTER> when finished.
MM = current month value
DD = current day value
YY = current year value
Use the number pad to edit the month, day, and year
values; press <ENTER> to accept each value.
Before the time and date are sent to the display, the
LCD will toggle between the two screens shown at left.
If the values are correct, press <ENTER> to confirm.
CLI ENTS FOUND N
I S THI S CORRECT?
CHECK POWER ON
CLI ENT AND RETRY
ENTER TO RETRY
CLEAR TO EXI T
SET TI ME 12HR
ENTER TO EDI T
SET TI ME 12HR
12:OO* PM }
SET TODAYS DATE
MM*/DD /YY
9/26/12
ENTER TO SEND
TI ME- 11:35 AM
ENTER TO SEND