Daktronics DakStats/Stat Crew & Venus 7000 - Manual (Page 5)

DakStats/Stat Crew & Venus 7000 Quick Guide 5 of 5
201 Daktronics Drive PO Box 5128, Brookings, SD 57006
Tel: 605-697-4036 or 888-325-7828 Fax: 605-697-4700
Website: www.daktronics.com
ED-15578 Rev 1
20 August 2009
Select the SelectStats scripting option to display a sequence that contains
RTD requested stats (Input 4).
1. Click Next.
2. Select a Stats Format, and then click Next.
3. Check Enable Enhanced RTD Display Selections. Select the
appropriate Sign Number, Display Mode, Drive Letter, Library, and
Sequence. After selecting the desired settings, click Next.
4. On the Enter Selections window, you may select specific team/player
names or leave them as %Select to choose them when the display
button is clicked. After selecting the desired settings, click Next.
5. Confirm the stat display settings are correct, and then click Finish.
Once all of the commands have been added to the script file, click Close
in the Edit Script window.
1. Click Monitor, located in the bottom-right corner of the Display
window. In the Monitor window, select View > Always on Top.
2. Select the sign from the drop-down menu.
3. Click one of the script buttons you just set up. If the sequence
assigned to the button is for requested stats, select the
team/player as needed and then click Accept.
4. Verify the information appears correctly in the monitor window.