DFI CR960-HM76 - Manual (Page 16)

www.dfi .com Chapter 3 Hardware Installation
16
Chapter 3
COM Express Connectors
The COM Express connectors are used to interface the CR960-QM77/HM76 COM Express board
to a carrier board. Connect the COM Express connectors (lcoated on the solder side of the
board) to the COM Express connectors on the carrier board.
Refer to the “Installing CR960-QM77/HM76 onto a Carrier Board” section for more information.
COM Express Connectors
Refer to the following pages for the pin functions of these connectors.