DFI CR960-HM76 - Manual (Page 35)

www.dfi .com Chapter 4 BIOS Setup
35
Chapter 4
ACPI Settings
This section is used to configure the ACPI parameters.
Enable ACPI Auto Configuration
Enable or disable ACPI Auto Configuration.
ACPI Sleep State
Select the highest ACPI sleep state that the system will enter when the Suspend
button is pressed.
S1(CSC) Enable the CPU Stop Clock function.
S3(STR) Enable the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system (via PCI, PCIE and
onboard LAN).
Resume by RTC Alarm
When Enabled, the system uses the RTC to generate a wakeup event.
Enables or Disables BIOS
ACPI Auto Confi guration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ACPI Settings
Enable ACPI Auto Confi guration
ACPI Sleep State
Resume by PME
Resume by RTC Alarm
Advanced
[Disabled]
[S3 (Suspend to RAM)]
[Disabled]
[Disabled]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
PC Health Status
This section displays hardware health monitor.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
System Hardware Monitor
CPU Smart Fan
CPU Temperature
CPU FAN Speed
System FAN Speed
VCore
VCCRTC
DDR
+1.05V
CPU VCCSA
EC Version
Advanced
[Enabled]
: +46 C
: N/A
: 7986 RPM
: +0.873 V
: +3.337 V
: +1.513 V
: +1.046 V
: +0.794 V
2013.06.11 V1.1
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
Enable/ Disable CPU
SmartFan
CPU Smart Fan
When this feature is enabled, the speed of CPU’s fan will rotate according to the CPU’s
temperature. The higher the temperature, the faster the speed of rotation.