Chapter 3 – DFI HD100-H81 User Manual

Page 39

Advertising

www.dfi .com

Chapter 3 BIOS Setup

Chapter 3

Intel(R) Ethernet Network Connection i217-LM - 88:88:88:...
(Only for reference)

This section is used to configure the parameters of Gigabit Ethernet device.

NIC Configuration

This field is used to configure the network device.

Blink LEDs

Blink LEDs for the specified duration (up to 15 seconds).

Link Status

This field indicates the link status of the network device.

Click to confi gure the
network device port.

PORT CONFIGURATION MENU



NIC Confi guration

Blink LEDs (range 0-15 seconds)

PORT CONFIGURATION INFORMATION

UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
PCI Bus: Device: Function:

Link Status

Factory MAC Address:

Advanced

Intel(R) 1GbE DEV 5.1.00
FFFFFF-OFF
Intel PCH LPT
153A
0:25:0

[Disconnected]

88:88:88:88:87:88

Intel(R) I210 Gigabit Network Connection - 00:01:29:26...
(Only for reference)

This section is used to configure the parameters of Gigabit Ethernet device.

Click to confi gure the
network device port.

PORT CONFIGURATION MENU



NIC Confi guration

Blink LEDs (range 0-15 seconds)

PORT CONFIGURATION INFORMATION

UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
PCI Bus: Device: Function:

Link Status

Factory MAC Address:

Alternate MAC Address:

Advanced

Intel(R) 1GbE DEV 5.1.00
001300-000
Intel i210
1533
2:0:0

[Disconnected]

00:01:29:26:70:2D

NIC Configuration

This field is used to configure the network device.

Blink LEDs

Blink LEDs for the specified duration (up to 15 seconds).

Link Status

This field indicates the link status of the network device.

Alternate MAC Address

Alternates assigned MAC address of Ethernet port.



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Reset
ESC: Exit