DFI HD630-H81 - Manual (Page 23)

www.dfi .com
23
Chapter 2 Hardware Installation
Chapter 2
Graphics Interfaces
The display ports consist of the following:
• 1 DVI-I port
• 1 HDMI port
DVI-I Port
The DVI-I port is used to connect an LCD monitor. This port supports DVI-D signal only.
Connect the display device’s cable connector to the DVI-I port. After plugging the cable con-
nector into the port, gently tighten the cable screws to hold the connector in place.
HDMI Port
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
BIOS Setting
Configure the display devices in the Chipset menu (“System Agent Configuration” submenu) of
the BIOS. Refer to the chapter 3 for more information.
DVI-I
HDMI
USB 2.0
RJ45 LAN Ports
The LAN port allows the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Chipset menu (“PCH-IO Configuration” submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
LAN 2
Features
• Intel ® I210 PCI Express Gigabit Ethernet controller
• Intel ® I217LM Gigabit Ethernet Phy
USB 2.0
LAN 1
LAN 1
LAN 2
Note:
HD630-H81B supports the Intel ® I210 PCI Express Gigabit Ethernet controller (LAN 1)
only.