DFI HD630-H81 - Manual (Page 42)

www.dfi .com
42
Chapter 3 BIOS Setup
Chapter 3
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not
be created.
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not
be created.
Intel(R) Ethernet Network Connection i217-LM - 00:01:29:...
This section is used to configure the parameters of the Gigabit Ethernet device.
Click to confi gure the
network device port.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PORT CONFIGURATION MENU
 NIC Confi guration
Blink LEDs (range 0-15 seconds)
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
PCI Bus: Device: Function:
Link Status
Factory MAC Address:
Advanced
0
Intel(R) 1GbE DEV 5.1.00
FFFFFF-OFF
Intel PCH LPT
153A
0:25:0
[Disconnected]
00:01:29:53:85:07
NIC Configuration
This field is used to configure the network device.
Blink LEDs
Blink LEDs for the specified duration (up to 15 seconds).
Link Status
This field indicates the link status of the network device.


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit