DCS BGB30-BQR - Manual (Page 12)

11
grill
exhaust
3" (to non-combustible construction /
minimum lid clearance),
12" (to combustible construction)
10-1/16"
22-3/4"
25-1/2"
3/4" 2"
13-3/4"
Standard layout for non-combustible enclosure:
NOTE: If using a backguard apron or rear
wall, locate electrical service on the right
hand side for rotisserie motor connection
NOTE: See page 10
for ventilation notes.
30" Models = 28-1/2"
Bottom of
support flange
3" Min. for Lid
Clearance
3" Min. for Lid
Clearance
30" Models = 28"
30" Models = 34-7/8"
30" Models = 28"
23-3/4"
3-1/2"
18-1/2"
20"
11-1/8"
35-1/2"
Max.
opening for access doors
4" x 4" opening
for gas supply line
opening for access doors
4" x 4" opening
for gas supply line
22-3/4"
18-1/2"
20"
10-1/8"
35-1/2"
Max.
Layout for insulated jacket only - combustible enclosure:
NOTE: If using a backguard apron or rear
wall, locate electrical service on the right
hand side for rotisserie motor connection
NOTE: See page 28, #29 for insulated
jacket part ordering information.
BUILT–IN CONSTRUCTION DETAILS
FIG.04