DCS BGB30-BQR - Manual (Page 14)

13
INSTALLER FINAL CHECKLIST:
GRILL BURNER FLAME HEIGHT:
To access the grill burner air shutters first remove the valve panel by removing it the same way as
described on page 12, section “Before Testing”. With a screw driver, loosen the lock-screw on the face
of the air shutter. Light the burner and adjust according to the directions below.
❏ Specified 12” clearances
maintained to combustibles.
❏ Verified proper enclosure
ventilation.
❏ Nylon straps removed from
burners.
❏ All internal packaging
removed.
❏ Knobs turn freely, bezels
centered.
❏ Each burner lights satisfac-
torily, individually or with
adjacent burner lit.
❏ Air shutters adjusted.
❏ Adjustable low setting satis-
factory.
❏ Drip pan in place properly
and sliding freely.
❏ Pressure regulator
connected and set for 4.0"
W.C. Natural, 11.2" W.C. LP
gas.
❏ Manual shut-off valve
installed and accessible.
❏ Unit tested and free of
leaks.
❏ User informed of gas supply
shut-off valve location.
❏ All radiants are assembled
(see page 15) and put in
place.
PLEASE LEAVE THESE
INSTRUCTIONS WITH THE
USER.
USER, PLEASE RETAIN
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
1-1/2"
3/8"
FIG. 07 Burner Flame Height
Sealed Burner
INSTALLER CHECKLIST/BURNER ADJUSTMENTS
FIG.09