DCS BGB30-BQR - Manual (Page 31)

30
CART ASSEMBLY INSTRUCTIONS
STEP 5:
Grill placement onto cart
A) Remove drip tray/pan for easier handling.Place grill head on cart
B) Slide back
C) Ease over rear flange
D) Secure with screws
E) Install bolts from Step 4 . After head is in place, install bolts omitted from Step #4 and tighten all bolts
on bracket.
NOTE: The bolt secures the side bracket to the grill head assembly for added side shelf strength.
A) After drip tray/pan is removed,
carefully place grill head on cart
(2 person minimum).
C-1) Grill head should rest over
rear cart flange as shown on
right.
C) Lift grill over rear flange of
cart (be aware of pinch
points).
D) Secure grill to rear of cart with
phillips-head screws (provided).
B) Once Grill rests on cart, ease grill
to rear of cart as shown.
Pinch Point
STEP 6:
Final assembly
Install remaining screws in front of head to cart. Slide drip tray/pan back
into place. Move side shelf bars up and set trays into place.
Secure grill to the front of the cart
with Phillips-head screws
(provided).
E) Install bolts omitted from Step
4 to secure grill body to the cart
side for added strength.