Dove Systems DM-410 - Manual (Page 5)

805.541.8292\\805.541.8293
DOVE LIGHTING SYSTEMS INC. \\3563 SUELDO STREET UNIT E
SAN LUIS OBISPO\\ CA 93401
OWNER’S MANUAL
805.541.8292\\805.541.8293
DOVE LIGHTING SYSTEMS INC. \\3563 SUELDO STREET UNIT E
SAN LUIS OBISPO\\ CA 93401
OWNER’S MANUAL
10\\ 09\\
****Be sure to check all wiring and lamps for shorts.
Shorts in power cables, lamps can cause reoccurring
major malfunctions. Most commonly blown SSR modules and Triacs.
In some instances it may burn out the motorbase or the wiring.
****Be sure to check all wiring and lamps for shorts. Shorts in
power cables, lamps can cause reoccurring major malfunctions.
Most commonly blown SSR modules and Triacs. In some instances
it may burn out the motorbase or the wiring.
****Be sure to check all wiring and lamps for shorts. Shorts in
power cables, lamps can cause reoccurring major malfunctions.
Most commonly blown SSR modules and Triacs. In some instances
it may burn out the motorbase or the wiring.
:In Case of Trouble
A// Troubleshooting:
A review of the following paragraphs may save you a long distance
phone call a tip to the service center, or the cost of shipping &/or
repair. Even if something is still wrong, this process will help you
explain the malfunction to the service technician.
Read the operating instructions carefully. Be sure you know how to
operate the equipment. Do not expect this equipment to operate
exactly like others. Any apparent failures result from not being
familiar wit the operating characteristic of the unit.
There are three forms of malfunctions common to solid state dimmers:
- “Failed off ” (in which the lights do not come on)
- “ Failed On” (in which the lights are on only)
- “Flickering” (where the levels will not maintain)
For solutions to these common problems see the charts on the
following pages
Check all lamps and wiring for shorts can cause damage!
B// Obtaining Service:
Service technicians are generally available between the hours of
8am to 4pm (Pacific time) Monday Through Friday. It is helpful
to have a complete description of the problem & to be in the
theatre or otherwise have access to the equipment when placing
the call.
It is recommended that all equipment be repaired at the factory.
If the unit is under warranty, it MUST be repaired at the factory.
Replacement parts are available, but because the Dimmermaster
packs are microcontroller based product running proprietary
software, schematics CAN NOT be released.