DR Power Tow Behind Premier 12.5hp B&S - Manual (Page 19)

CONTACT US AT www.DRpower.com 19
Stopping the Engine
1. Disengage the Blades by pushing the Blade Control Knob down (Figure 20).
2. Move the Throttle Control Lever all the way down to the IDLE position and turn the Key to STOP.
3. Remove the Key for safety. The Key has a pressure lock that prevents it from vibrating loose during operation. To remove the
Key, push it in and then quickly and firmly pull it out. If the Key becomes difficult to remove, apply a non-conductive lubricant
into the Keyhole.
Note: Close the Fuel Shut-Off Valve when transporting or storing the TOW-BEHIND DR FIELD and BRUSH MOWER.
Engaging the Blades (Premier Model)
1. Engage the Blades by turning and holding the Key to the furthest right
position as you pull UP on the Blade Control Knob (Figure 22). Release the
Key and it will return to the run (middle) position.
Engaging the Blades (Pro and Pro-XL Models)
1. Engage the Blades by pulling UP on the Blade Control Knob (Figure 22).
Stopping the Blades
1. Push DOWN on the Blade Control Knob (Figure 22).
Never stop the engine by moving the throttle control lever to the choke position. This could cause an engine backfire resulting in
engine damage.
Blade
Control
Knob
Figure 22
Throttle Control
Lever
Remote
Control
Panel
Key
Switch
Choke
Idle
Run