DR Power Walk-Behind On Board Vacuum Hose (July 2010 and Prior) - Manual (Page 9)

CALL TOLL FREE 1-800-DR-OWNER 5
CHAPTER 3
DR WALK-BEHIND LEAF & LAWN VACUUM OPTIONAL ON-
BOARD VACUUM HOSE ACCESSORY
This chapter outlines a few simple steps you will need to follow to set up and use your new Optional On-
Board Vacuum Hose Accessory for your DR WALK-BEHIND LEAF & LAWN VACUUM. If you have any
questions at all, please feel free to contact our Customer Service Representatives at our toll free number:
1-800-DR-OWNER (376-9637).
Connecting the Optional On-Board Vacuum Hose (Kit No. 21815)
In addition to using your machine as a walk-behind vacuum, the Optional On-Board Vacuum Hose also
provides the constant availability for vacuuming flowerbeds, around trees and under bushes, and other hard
to reach places.
BEFORE PERFORMING THIS PROCEDURE, STOP THE ENGINE AND DISCONNECT THE SPARK PLUG WIRE.
NOTE: The design of the DR WALK-BEHIND LEAF & LAWN VACUUM is to vacuum debris mixed with cans,
bottles, and small amounts of sand.
The following instructions detail the steps required to assemble the On-Board Vacuum Hose Accessory and
the two (2) Hose Rest Brackets to the vacuum.
Parts Supplied:
(see Parts List on page 9)
Tools Needed:
•
(2) 7/16" Wrench or Socket
•
(2) 3/8" Wrench or Socket
•
(2) 1/2" Wrench or Socket
•
Blade Screw Driver
•
Drill with 1/4" Bit
•
Petroleum Jelly (optional)