Installation of optional side rails, Cargo bed information – DR Power Power Wagon 4 x 2 8hp B&S (April 2002 - March 2004) User Manual

Page 15

Advertising
background image

Page 15

Installation of Optional Side Rails

You can purchase the
optional side rails that are
shown in full on the front
cover. Installation is quite
easy. Pry off the caps that
are in the tops of the tubes,
the install the rails as
shown. Screw in the bolts
in all the tubes and tighten
with an adjustable wrench.
Save the caps with your
Operating Manual.

Cargo Bed Information

The Cargo bed has simple but sturdy latch
mechanisms as shown in Figure 10. The
sides are hinged at the bottom and the rear
door is hinged at the corner. To unlock,
move the lever to a straight up position
and slide the lever out of the latch bracket
in the direction of the arrow.

One end of the chain can slide off the
lever and hook onto the latch bracket. See
Figure 4 on page 11. This will allow the
side to lay flat if you wish.

Bolts

Figure 9

Latch Bracket

Latch lever

Figure 10

Advertising
This manual is related to the following products: