Drake DNP50/DNP50 AVW Network Media Player - Manual (Page 19)

17
1
Download the latest firmware and copy it to the root directory of a USB drive from
http://support.iadea.com
2
Plug in the power cord into the device.
3
Plug in a USB mouse to the device to enter Basic settings menu.
4
Click the Advanced button. (Fig. 2.6.1)
5
Click on System, and choose Firmware.
6
Click on OK to begin the firmware update.
(Fig. 2.14.1)
7
Plug in the USB drive while the screen shows “Scanning USB drives for firmware package”.
(Fig. 2.14.2)
2.15. System configuration ‐ Factory reset
If you forget the system password, you must reset the system to access to the player.
Using the reset button
1
PRESS and HOLD the reset button with a pin.
2
RE‐CONNECT the power cord.
3
WAIT about 10 seconds or until the status LED flashes.
4
RELEASE reset button and wait for system to initialize.
Reset button