Elfa Utility User Manual
Utility, Wall-mounted installation
www.elfa.com
Sida 1 av 1
Utility
Assembly instructions
To install on a utility track
–
Insert tab into lower lip of track (Figure A)
–
Insert top of hook under top lip of track
–
Pull hook down until it clicks into place (Figure B)
Wall-mounted installation
–
You must locate a stud for wall-mounted installation
–
Drill 1/8”/3 mm pilot holes the length of the screws
–
Tighten with #2 Phillips screwdriver (Figure C)
Utility is a system of hooks and holders that can be
used with wire shelves and drawers to transform
your garage, utility room and mudroom into an organ-
ized space. When used in conjunction with an utility
track, the hooks are infinitely adjustable. Most utility
hooks can also be mounted directly to a stud to hold
up to 50 lbs/22 kg. (wood screws are included.)
A
B
C
Elfa Lumi AB
Elfagatan 5, 593 87 Västervik
Tel: +46 392-389 10 Fax: +46 392-361 25. E-mail: [email protected]