Epiphan VGA Printer - Manual (Page 36)

4. VGA Printer Web admin interface Adding or Changing the Administrator’s Password
Page 36 Epiphan VGA Printer
Adding or Changing the
Administrator’s Password
Add a password for the Web admin interface to control access to
the interface. You can add a password or change the password at
any time.
Note: If you lose or forget the admin password you can contact
Epiphan Technical Support for help to reset it.
To add a password to the Web admin interface
1 Log into the Web admin interface.
The Change Administrator's Password section appears at the
top of the Web admin interface.
Figure 18:Change Administrator's Password
2 Enter and repeat the new password.
The password is case sensitive and can include up to 255
ASCII characters.
3 Select Change Administrator Password and select Continue.
The password changes and you must log into the Web admin
interface again.
4 Log into the Web admin interface with the admin user name
and the new password.
To delete the Web admin interface password
You can delete the Web admin interface password if you don’t
want to require administrators to enter a password to log into the
Web admin interface.