ESI MAYA44 USB - Manual (Page 7)

ESI MAYA44 USB+
7
You can now finally click Next on the ESI MAYA44 USB Audio Driver Setup dialog. The
installation is now finished. To confirm this, please check if the ESI icon is displayed in the taskbar
notification area as shown below. Sometimes a reboot is required.
If yes, the driver installation has been completed successfully.
2.3.2 Installation under Windows Vista / 7 / 8
Unplug the device before you start the installer if it is already connected. Then launch setup.exe
from the MAYA44 USB+/Windows folder of the included driver CD or from a download of a recent
driver from our website.
When launching the installation, Windows Vista / 7 / 8 might prompt a security message. Make sure
to allow the installation. You will then see a dialog as shown on the left picture below. Click Next.
You can define the target directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you might see a Windows Security
dialog box once or several times that asks you for confirmation to install the driver software.
Confirm any such dialog with Install.