ESI U46 SE - Manual (Page 15)

U46 SE ESI
15
- sampling rate: 44.1 kHz (4 In / 6 Out)
48 kHz (4 In / 4Out)
- resolution: 16 bit
Analog Input Specifications
- 4 channel analog input / line, mic, Hi-Z input support
- line input level: -10dBV unbalanced nominal level, +6dBV maximum level
- input impedance - Line: 10K ohm
Mic: 6.8K ohm
Hi-Z: 200K ohm or better
- +48V phantom power support for microphone input
Analog Output Specifications
- 6 channel analog output and mix output
- line output level: -10dBV unbalanced nominal level, +6dBV maximum level
- output impedance: 100 ohms
ADC Specifications
- dynamic range: 85dB a-weighted (typical)
- frequency response: 20 ~ 20 kHz (+/- 0.25dB max, @ fs=48 kHz)
- resolution: 18 bits
DAC Specifications
- dynamic range: 87dB a-weighted (typical)
- frequency response: 20 ~ 20 kHz ((+/- 0.25dB max, @ fs=48 kHz)
- resolution: 20 bits
Headphone Amp Specifications
- output power: 125mW max @ 32 ohm
- recommended load impedance: 32 ~ 300 ohm
Power Specifications
- power consumption: 2.5W (typical)
- USB bus powered (500mA maximum) and DC +9V/500mA adapter support