ESI U46 SE - Manual (Page 6)

U46 SE ESI
2.2 Rear Panel
(1) External Power supply connector:
If you use a microphone that requires phantom power, especially with a laptop computer, it’s
strongly recommended to use a DC +9V/500mA adapter (not included). When you turn on
U46 SE or when you turn on/off phantom power, the current peak level might go over 500mA.
(2) USB connector: Connects the USB cable to the computer.
(3) Input 1~4: The line level inputs for line level sources like tape decks, mixer outputs, CD-
Players, etc.
(4) Output 1~6: You can use these outputs to connect to various external devices or for a 5.1
surround connection.
(5) Mix output: You can monitor all input sources and output sources through the Mix output.
Usually, you can use Mix out to connect to powered monitor speakers.
3. Hardware Installation
3.1 Minimum system requirements
PC
-
Intel Pentium III 600MHz CPU or equivalent AMD CPU
-
256MB RAM
-
Direct X 8.1 or higher
-
recent Version of Microsoft Windows
-
one available USB port
Mac
-
Power Macintosh G4 or higher
6