ESI Miditerminal 4140 - Manual (Page 23)

22
< Example – Cubase VST >
These numbers refer to the Miditerminal 4140's MIDI Input and Output sockets. To check if
your Miditerminal 4140 is working properly, you should enable all 4 inputs and 4 outputs and
see if the MIDI signal is present on all sockets.
1. Open your favorite MIDI sequencer and send a signal on all 16 MIDI
channels to the 4140-Out 1 thru the 4140-Out 4 MIDI Output ports.
2. Check the front panel LED's on the Miditerminal 4140 to see if they are
blinking when a MIDI signal is present. If so, the Miditerminal 4140’s MIDI
Outputs are working properly.
3. To check if the MIDI Inputs are working, connect your favorite keyboard
controller to any one of the four MIDI Inputs of the Miditerminal 4140.
4. Set up your keyboard to send a MIDI signal on all 16 MIDI channels (OMNI
mode) and start playing. If the Miditerminal 4140's front panel LED's are
blinking with a press of the keyboard, the MIDI Inputs are working properly.