ESI Miditerminal 4140 - Manual (Page 5)

4
Introduction
Thank you for purchasing the Miditerminal 4140, the professional choice MIDI/SMPTE
interface for IBM PC and compatibles. This manual will guide you to follow a step-by-step
installation of hardware and software for a variety of setup options according to your system.
For best results, we suggest that you read this manual in its entirety before beginning any
software or hardware installation.
R E Q U I R E M E N T S
To install and use the Miditerminal 4140 in your computer music system, you will need, at
minimum, the following equipment and components:
1. IBM compatible computer with a parallel printer port, running Microsoft
Windows 98SE, ME, or 2000 operating system.
2. MIDI instrument(s) – Synthesizers, Sound Modules…
3. Standard MIDI cables (at least 2)
4. MIDI software
* If you want to use the Miditerminal 4140 with an older Windows operating system
such as Windows 95 or 98, you should use the older Miditerminal 4140 driver
instead of the EWDM driver.
You can download it from our website: www.egosys.net