ESI NeON - Manual (Page 21)

ESI
21
10. Operation Guide
1) User Interface
The general format for changing a parameter on NeON is
(SHIFT) + FUNCTION ‐> VALUE ‐> ENTER
Many functions are accessed using the SHIFT key in combination with another button. The SHIFT key
should be held down while the desired function is selected. Modifying assignable controllers is similar
but requires an additional step.
When a value needs to be entered, the number can be typed in using the buttons 0‐9 on the front panel.
Additionally, the INC/DEC buttons can be used to increment or decrement the current displayed value
by 1.
When the buttons 0‐9 are not used to enter numeric data, the default functions are as programmable
MIDI triggers. These can be used as drum pads or to trigger samples, or simply play any MIDI note.
Note number and MIDI channel are independently programmable for each pad. Pad velocity is fixed at
127.
If a function has been entered by mistake, the mode can be exited by pressing ENTER. No data will be
saved and the configuration of NeON will not be changed.