Feelworld FW5D-TRM/O User Manual

Page 6

background image


6. Appreance installation sizemm

7. OSD operating instruction(same operating with L/R screen)

Before setting the menu functions, please make sure the device is

connected correctly


Power switch(at the back of the unit) dial to ON position.

The monitor enter into working state. Please dial to OFF position ,when need

to close the unit. After enter into working state, press the "mode"button on the

unit, according to the input video signal to switch signals(under NO menu state,

using the shortcut button on the panel to operate). Press "

" button on the

unit, then enter into OSD menu operation. Operate “▲”or“▼”on the unit to

select or adjust the needed options.




(sound); After select options, press “◄”or“►”on the unit to confirm, then

using “▲”or“▼”to select or adjust the value of Analog. After confirm the

needed adjust parameters, using “◄”or“►”to adjust. If need to exit OSD menu,

repress “

” button.